D&R Santa Rosa Spray Foam InsulationD&R Santa Rosa Spray Foam Insulation

Professional Insulation Contractor in Santa Rosa CA - Rooms That Stay Comfortable

D&R Santa Rosa Spray Foam Insulation does attic insulation and spray foam for homes in Santa Rosa, Windsor and the cities around it. We also replace old attic insulation and insulate crawl spaces under the cold floors of older houses.

Thick, bumpy white spray foam covers the underside of a ceiling in overlapping horizontal bands.
  • Licensed and insured.
  • Free on-site estimates.
  • We respond within 1 business day.

A Santa Rosa insulation contractor that looks before quoting

D&R Santa Rosa Spray Foam Insulation is an insulation contractor based in Santa Rosa, CA, licensed and insured, and in business since 2023. We offer 16 insulation services for homes and commercial buildings, and we travel from Santa Rosa to many of the cities around it. Most of our calls are about drafty rooms, high power bills and older attics people aren't sure about. You can read how I got into this trade and how we work on our about page.

Cream-colored spray foam fills exposed wall framing beneath two wood-trimmed windows.

Insulation contractor services in Santa Rosa, CA

D&R Santa Rosa Spray Foam Insulation is an insulation contractor in Santa Rosa with 16 services for drafty rooms, cold floors and high power bills. Price and schedule turn mostly on how much old material comes out, what needs sealing first, which material you pick and how easy the space is to reach, and your free estimate lays that out.

  • Loose yellow insulation covers an attic floor beneath exposed rafters, with insulated ducts running overhead.

    Spray foam insulation

    We spray foam that expands into gaps as it goes on, so it insulates and seals air in one step, which suits attics with ductwork running through them.

  • Shiny foil-faced insulation is fitted between wooden attic rafters.

    Attic insulation

    If the upstairs gets hot or the power bill keeps climbing, we check the inches already in your attic, seal the gaps and bring it up to an even depth.

  • Spray foam covers the walls and ceiling of a wood-framed room with windows and an exterior door.

    Blown-in insulation

    Blown-in insulation is loose fill we blow through a hose across the attic floor, a good fit for topping up an older attic once the gaps are sealed.

  • Spray foam fills the roof and wall cavities of a wood-framed house, surrounding exposed rafters and wiring.

    Home insulation

    For a house that feels drafty all over, we look at the attic, walls and crawl space together and fix the weakest spots in the right order.

  • Unfinished attic with yellow spray foam filling the walls and roof framing, a window, exposed ducts and a plywood floor.

    Insulation removal

    When old insulation is soaked, matted or full of droppings, we vacuum it out and haul it away so new material doesn't go on top of the problem.

  • Spray foam insulation coats the roof and walls of a tall unfinished attic, with exposed wooden trusses and a staircase.

    Crawl space insulation

    Cold floors usually trace back to the crawl space, so we insulate between the floor joists under your house and fasten the material so it stays put.

  • Spray foam fills the ceiling spaces between exposed wooden rafters, with several blue electrical boxes and vent openings.

    Wall insulation

    We add insulation to walls in older homes that were built with little or none, filling the cavities through small openings rather than opening up whole walls.

  • Attic with exposed beams and roof slopes coated in white spray foam, with skylights, wiring, and ventilation pipes visible.

    Air sealing services

    We find the leaks that make a house drafty, around plumbing, wiring and holes cut through the floor, and close them so your heating and cooling stay inside.

  • An unfinished room has yellow spray foam insulation between exposed wall studs and roof framing, with a window and ductwork.

    Basement insulation

    We insulate basement walls and rim joists, the band of framing that sits on the foundation, so the rooms above and any finished space downstairs feel less cold.

  • A worker sprays white closed-cell foam onto a surface with a hose-mounted gun, beside a growing mound of foam.

    Closed-cell foam insulation

    Closed-cell foam is a dense foam that also blocks moisture, so we use it where water or damp air is a concern, like crawl spaces and rim joists.

  • Foam insulation coats the attic roof above a gray HVAC unit and shiny flexible ducts.

    Open-cell foam insulation

    Open-cell foam is softer and lighter than closed-cell, and we spray it into attic rooflines and walls where you want air sealing and quieter rooms for less money.

  • Pink fiberglass batts fill the walls and ceiling of an unfinished room with two windows and exposed wooden framing.

    Commercial insulation

    We insulate offices, shops and other commercial buildings for property managers and owners, scheduling the work around tenants and keeping the paperwork in order.

  • A worker in protective gear sprays expanding foam insulation between exposed wooden wall studs.

    Crawl space vapor barrier

    A crawl space vapor barrier is heavy plastic laid over the dirt under your house, which helps keep ground moisture out of the floor framing and insulation.

  • Reflective foil vapor barrier covers an unfinished ceiling around a large insulated duct and support post.

    Vapor barrier installation

    During a remodel or addition, we install vapor barriers on the correct side of the insulation in walls and ceilings, so damp air doesn't collect inside the framing.

  • A worker in protective gear sprays foam insulation into an exposed wall cavity beside unfinished wooden studs.

    Attic air sealing

    Before any new insulation goes in, we seal the gaps around can lights, pipes and the attic hatch, since covering a leak only hides it.

  • Pink fiberglass batts fill the spaces between wooden attic joists, with ducts and straps visible below.

    Retrofit insulation

    Retrofit insulation means adding to a house that's already built and lived in, so we work around finished rooms and existing wiring instead of starting from open framing.

Why homeowners choose D&R for insulation

  • I look at your house myself

    I come out and check the attic, crawl space or walls before we quote, so the estimate fits your house and isn't a guess.

  • Questions answered in plain words

    We take the time to walk you through your options, so you know what you're paying for before you agree to anything.

  • Problems fixed before they're covered

    We deal with wet or dirty insulation and open gaps first, because new material laid over a hidden problem is hard to undo.

  • Trained on a city crew

    I learned insulation and air sealing on city buildings, where every job had to pass an inspector, so we write things down and check our work.

  • Licensed and insured for your job

    We're licensed and insured, which matters because only licensed contractors or owner-builders can get building permits in Santa Rosa.

  • Even depth, eave vents left clear

    We keep insulation as deep at the edges as in the middle and leave the eave vents open, so your attic can still breathe.

Have a drafty room or an attic you're unsure about? Tell us about it here or call (707) 508-4085.

Tell us about the room or attic that's bothering you

We reply within one business day to set up a free visit at your home, and there's no obligation. I come out to look at the space myself, and then you get an estimate that lays out the order of the work.

Call (707) 508-4085

Loose white blown-in insulation blankets an attic floor among exposed wooden trusses.

Where we work around Santa Rosa

D&R Santa Rosa Spray Foam Insulation is based in Santa Rosa, CA, and travels to many of the cities around it for insulation work. Twelve cities have their own page here, including Petaluma and Sebastopol, and if yours isn't listed, give us a call and ask.

Your insulation questions answered

How much does attic insulation cost in Santa Rosa?

The cost depends on the size of your attic, what's already up there and which material you choose, so we give you a figure after a free look at your house. Hauling out old insulation, sealing gaps first and a tight space to work in all add to it.

Why does spray foam insulation cost more than blown-in?

Spray foam costs more because it seals air and insulates in one coat, while blown-in insulation only insulates. For most attics, sealing the gaps and topping up blown-in insulation is the better value, unless your ductwork runs through the attic.

How long will the insulation crew be in my attic?

That depends on how big the attic is, how much old material has to come out and how much sealing comes first, and your estimate will show the order of the work. Removal and sealing usually take longer than laying the new insulation.

Do we have to leave the house during spray foam insulation?

For spray foam, yes, you, your kids and your pets stay out until the re-entry time the foam maker sets, the point when it's safe to come back inside. We go over that time with you before the job is booked, and blown-in insulation and air sealing usually don't mean leaving home.

Does an insulation contractor need a license in California?

Yes, in most cases, because California requires a license from the Contractors State License Board when a job needs a building permit, uses employee labor, or totals $1,000 or more in labor and materials. Contractors working in Santa Rosa also need an active city business license, and we're licensed and insured.

Do I need a permit to insulate my house in Santa Rosa?

It may, so check with the city before work starts, since Santa Rosa requires a building permit for work that alters or repairs a building and only licensed contractors or owner-builders can get one. You can ask the city's Building Division, and when your job needs a permit, we apply for it and set up the inspections.

Do you guarantee your insulation work?

Yes, our insulation work is backed by our satisfaction guarantee. If something about the finished job doesn't look right to you, ask us, because we'd rather explain it or look at it than have you wonder.

Should old insulation be removed before adding new insulation?

Only when it's wet, matted or full of droppings, because new insulation laid over a problem keeps the problem in your attic. Clean, dry insulation can usually stay, and we tell you which you have once we've looked.

How an insulation job works with us

  1. Call or send the form

    Call (707) 508-4085 or fill out the form with a few lines about what's bothering you, like a hot upstairs, cold floors or an attic you're unsure about. We reply within one business day and set up a free visit to your home at a time that works for you.

  2. On-site look and estimate

    I come out myself and check the attic, crawl space or walls, including the inches already up there and any wet spots, droppings or open gaps. Your estimate lays out the order of the work, with any checks or sealing that come first, and there's no obligation to go ahead.

  3. Permit and install

    If your job needs a permit, we apply for it and set up the inspections. Our install crew then does the work in the order on your estimate, with me running it on site, so anything that needs fixing first gets fixed before it's covered up.

  4. Walk-through and paperwork

    When we're done, I walk you through the finished job so you can see what went in and where, and ask anything you like. If the job had a permit, you get a copy of the paperwork for your records.

(707) 508-4085Request an estimate